Hi @Slim me thinks the same as you glad Iām not the only one.
4 Likes
Hey, @mackam_man. Early on in my career, one of the screws on my Bb Special 20 came loose. The nut that holds the harp and screw together is that same frilly square shaped design as the Lee Oskar, but a bit smaller. I recommend that you put the nut on the hole first, then tighten the screw up with a posidriv screwdriver to just the right amount. Donāt tighten it too tight though.
6 Likes
Seems they could spring for whatever it costs to add another 16th of an inch or to to the screws. It would certainly make our lives easier when we want to fiddle around with them.
Times are tough, but I donāt figure it could cost that much! 
3 Likes
Iāve taken Lee Oskars apart and put 'em back together many times. As KeroroRinChou suggested, I set the nut over the hole on the bottom plate and hold it down with my finger- then add top plate and screw. Personally, Iāve no problem with the screw length. I have big hands and fat fingers and if I can do it easily, anyone can.
8 Likes
Hey @mackam_man so youāre problem isnāt actually tuning the harmonicas, just putting them back together yeah? I recently took mine apart for the first time to fix a gapping issue and had the same experience as I shared about in this post.
@Trapper great photos man! Thanks for encouraging the rest of us. It feels a little spooky, like āis this even gonna work?ā But then it does!
Aloha,
Luke
4 Likes
Thanks, I actually made a video but the site wouldnāt upload the file, thus, the photos. I think the cover plates are easy ā itās when you start messing with the reeds that trouble comes! 
4 Likes
You make a good point, @Trapper ! And this why it is so important to first gather experience by doing reed work on cheap or unimportant harps before trying to work on a valuable harp.
I actually bought several cheap harps (ca. 10-12 U$) and did all sorts of reed work on them just to learn the techniques, such as re-tuning, gapping corrections, reed shaping, etc. It was worth the time & expense!
Regards,
ā Slim 
5 Likes
That is the only thing about the Lee Oscar I donāt like , I was really aggravated by the time I put it back together.
4 Likes
Hey guys. Itās designed that way to stop us from catching ourselves on a jutting screw end 
5 Likes
@stonestone63, naturally! As with everything, poor to no description. Or written so small that you canāt read the description despite the 
! Everyone wants to earn 
! 
1 Like
Thatās a great point, having it flush keeps it from snagging on things 
3 Likes
The screw is to hold it in place once itās together. Not pull it together. As @KeroroRinChou said, hold the nut to the hole with harp together before putting the screw in. Maybe elastic bands would make it less fiddly
1 Like
@stonestone63, oh rubber bands! Thatās what @HarpinBobbyMcB experienced.
Sometimes I have a memory like a horse. But that was really good! Maybe @HarpinBobbyMcB will show you again? 
2 Likes
Oh no, what happen to @HarpinBobbyMcB Rubber bands? Sounds horrific. 
Though as a nurse, I am looking forward to seeing the scars. 
1 Like
Nice one @AstridHandbikebee63 Although I didnāt see any physical scars, I do understand the psychological damage 
1 Like
@stonestone63, you see the rubber bands? They hold the mangled screws. It was a big drama for @HarpinBobbyMcB as he loved playing that harp. Wait for him to comment on this.
2 Likes